pdf Stock 2KS56 

 pdf Stock 2KS95   

 pdf Stock 2KS160 

 pdf Stock 2KS240 

 pdf Stock 2KS325 

 pdf Stock 2KS444 

Stock

Airpot Precision Dashpots stock configurations offer a range of sizes and capabilities designed to satisfy many requirements in which accurate and repeatable control of force and or impact is desired.  The stock line offers predetermined choices for stroke, mounting length, rod type, and rod end. Stock Airpot Air Dashpots are available in 6 bore diameters ranging from .22 inches to 1.75 inches with either push, pull, or two-way damping and strokes from 0.5 inches to 3 inches. Please click here for a comparison of stock versus custom dashpots.

MODEL  2KS56 -
Bore Size: .220" (5.59 mm)
 2KS95 -
Bore Size: .366" (9.3 mm)
 2KS160 - Bore Size: .627" (15.93 mm)  2KS240 - Bore Size: .945" (24 mm)  2KS325 - Bore Size: 1.281" (32.5 mm)  2KS444 - Bore Size: 1.750" (44.4 mm)
 BORE (inches)  0.22  0.366  0.627   0.945  1.281  1.75
 STROKES AVAILABLE - STOCK UNITS (inches)  .5,1.0, 1.5,2.0  .5,1.0, 1.5,2.0  .5,1.0, 1.5,2.0,3.0  .5,1.0, 2.0,3.0  .5,1.0, 2.0,3.0  .5,1.0, 2.0,3.0
 FIXED STROKE FOR SNUBBER MODELS (inches)  N/A  N/A  1.5  2   2   2
 FORCE CAPACITY: PULL DAMPING DIRECTION lbs force (Starting from fully retracted position)  0.5  1.4  4  9  17  30
 FORCE CAPACITY: PUSH DAMPING DIRECTION lbs force (Starting from fully extended position)  0.35  1  3  7  13  24
 APPROX. ENERGY CAPACITY: PULL DAMPING DIRECTION FOR 1 IN. STROKE (inch-lbs)  0.22  0.64  1.8  4.1  7.5  14
APPROX. ENERGY CAPACITY: PULL DAMPING DIRECTION FOR 3 IN. STROKE (inch-lbs) 0.75 2.2 6.1 14 26 48
APPROX. ENERGY CAPACITY: PUSH DAMPING DIRECTION FOR 1 IN. STROKE (inch-lbs) 0.28 0.8 2.2 5.2 9.5 18
APPROX. ENERGY CAPACITY: PUSH DAMPING DIRECTION FOR 3 IN. STROKE (inch-lbs) 1.5 4.2 12 27 50 93
 APPROX. ENERGY CAPACITY: SNUBBER MODELS TO STANDARD STROKE (ft-lbs)  N/A  N/A  0-.3  0-.75  0-3  0-7
 DAMPING COEFICIENT RANGE: FORCE/VELOCITY: lbs/(in/sec)  0-.5  0-2  0-5  0-30  0-40  0-40
 FRICTION COEFFICIENT (approx.) Static and dynamic  0.2  0.2  0.2  0.2  0.2  0.2
 PISTON FRICTION WHEN HORIZONTAL (without side load):grams  <1  <1  <1  <1  <4  <8
 OPERATING TEMPERATURE RANGE *NOTE: If operating at temperatures over 70 degrees C (158 degrees F) please advise factory  -55C to +150C  -55C to +150C  -55C to +150C  -55C to +150C  -55C to +75C  -55C to +75C
COMPONENT WEIGHT: Fixed mass in grams (cylinder, bottom, etc.) =(C1 x Stroke) + C2 C1 = 1.2 C2 = 6.4  C1 = 2.9 C2 = 8.9  C1 = 6.1 C2 = 13.6  C1 = 11.5 C2 = 40.6  C1 = 17.5 C2 = 60.3  C1 = 25.7 C2 = 82.1
 COMPONENT WEIGHT: Movable mass in grams (piston and rod) =(C3 x Stroke) + C4  C3 = .2 C4 = 1.4  C3 = .4 C4 = 2.8  C3 = .4 C4 = 4.3  C3 = 1.3 C4 = 8.3  C3 = 6.3 C4 = 13.6  C3 = 6.3 C4 = 31.6