pdf Standard Air Wipes Download Product PDF

pdf Standard Air Wipes  Download Installation Sheet  

pdf Standard Air Wipes Air Wipe Shim Set

Standard Air Wipe
This hard-hitting 360° ring of airflow is the economical way to blowoff, dry, clean and cool.

Standard Air WipeWhat is the Standard Air Wipe 
EXAIR’s Standard Air Wipe provides a uniform 360° airstream that is ideal for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose, wire and more. The split design offers easy clamping around the surface of the material moving through it, eliminating the need for threading. All models include painted screws and plastic shims. Reinforced rubber hose is also included on sizes up to 4" (102mm) for added corrosion and heat resistance. Standard Air Wipe models are rated for temperatures up to 150°F (66°C).

 

Why The Standard Air Wipe ?

Standard Air Wipe removes liquid from rods

The Standard Air Wipe removes
liquid from a plastic rod.

The Standard Air Wipe is an economic choice when the added properties of stainless steel are not required. The Standard Air Wipe is generally suited to non-corrosive applications where temperatures do not exceed 150°F (66°C).The Standard Air Wipe includes painted screws, plastic shims & a general purpose PVC coupling air hose on sizes up to 4”(102 mm).It meets OSHA maximum dead end pressure & noise requirements.

 

Appplication

Air Wipe blows coolant off parts

The Standard Air Wipe blows coolant off
the part and back into the centerless grinder.

  • Drying after wash, cleaning, plating or coating
  • Blowoff dust and contaminants
  • Cool hot extruded shapes
  • Uniformly wipe surfaces
  • Dry extruded profiles, rod and medical tubing
  • Eliminate solution carry - no cross contamination
  • Blow excess water from automotive door gaskets
  • Remove excess coatings, water and oil
  • Dry tube, hose, wire, fiber optics
  • Minimize solution loss due to dragout
  • Clean paint gun tips
  • Dry screen printed or ink jetted surfaces
  • Clean strips and ribbon

Advantages

air wipes blowoff excess coatings

A Model 2431 1" (25mm) Standard Air Wipe
blows off the excess coating from a wire
into a dip tank.

  • Quiet
  • Low air consumption
  • Uniform airflow across the entire diameter
  • No electricity, no moving parts
  • Non-contact - no wiper blade
  • Lightweight, low profile
  • Tapped holes for mounting
  • Split design - compact, rugged, easy to install
  • Meets OSHA maximum dead end pressure and noise requirements

 

How The Standard Air Wipe Works

How the Air Wipe Works

Compressed air flows through an inlet (1) of the Standard Air Wipe into an annular chamber (2). It is then throttled through a small ring nozzle (3) at high velocity. This primary airstream adheres to the coanda profile (4), which directs it down the angled surface of the Standard Air Wipe. A low pressure area is created at the center (5) inducing a high volume flow of surrounding air into the primary airstream. As the airflow leaves the Standard Air Wipe, it creates a conical 360° ring of air that attaches itself to the surface of the material running through it (6), uniformly wiping the entire surface with the high velocity airflow.

Standard Air Wipe Performance

with .002" (.05mm) thick shim installed

80 PSIG
(5.5 BAR)
Air Consumption Sound Level
@ 3' (914mm)
MODEL SCFM SLPM dBA
2430 13.9 394 75
2431 19.1 541 76
2432 29.5 835 77
2433 39.8 1,127 79
2434 50.2 1,422 81
2435 60.6 1,716 82
2436 71.0 2,010 84
2437 81.3 2,302 85
2439 102.1 2,891 87
2441 122.8 3,477 89

Dimensions

sawdim Standard Air Wipes
Standard Air Wipe Dimensions
MODEL # A B C D
2430 in 3.25 1.13 0.05 2.5
mm 83 29 13 64
2431 in 3.75 1.13 1.0 2.95
mm 95 29 25 75
2432 in 4.75 1.13 2.0 3.95
mm 121 29 51 100
2433 in 5.75 1.13 3.0 4.95
mm 146 29 78 126
2434 in 6.75 1.13 4.0 5.95
mm 172 29 102 151
2435 in 7.75 1.13 5.0 6.95
mm 197 29 127 176
2436 in 8.75 1.13 6.0 7.95
mm 222 29 152 202
2437 in 9.75 1.13 7.0 8.95
mm 248 29 178 227
2439 in 11.75 1.13 9.0 10.95
mm 299 29 229 278
2441 in 13.75 1.13 11.0 12.95
mm 349 29 279 329

Standard Air Wipe Specifications

Super Aire Wipe is available in 10 Sizes

The Standard Air Wipe is available in 10 sizes from stock.

The Standard Air Wipe is available with throat diameters (I.D.) of 1/2", 1", 2", 3", 4", 5", 6", 7", 9", and 11" (13, 25, 51, 76, 102, 127, 152, 178, 229, and 279mm). Special diameters are available.

Compressed Air Inlets: The Standard Air Wipe has compressed air inlets on each half. General purpose compressed air hose is supplied with sizes up to 4" (102mm) that couples the air supply of one half to the other. Sizes 9" (229mm) and larger have two inlets on each half that must be supplied with compressed air to maintain uniform airflow.

Filtration: The use of clean air is essential. Kits include an automatic drain filter with a 5 micron filter element that is sized properly for flow.

Materials of Construction: The Standard Air Wipe is constructed of aluminum. All models use painted screws and plastic shims. General purpose PVC air hose is included with sizes up to 4" (102mm).

Temperature: The Standard Air Wipe is rated for temperatures up to 150°F (66°C).

Mounting: The Standard Air Wipe can be supported by the compressed air supply pipe. Tapped holes (1/4-20) on the bottom of the Standard Air Wipe can also be used for mounting.

Regulation: A pressure regulator on the compressed air supply provides infinite control of flow, force and air consumption. Kits include a pressure regulator that is sized properly for flow.

Shim Sets: The Standard Air Wipe has a .002" (.05mm) gap setting. The compressed air exhausts through a gap which is set with a plastic shim positioned between the cap and body of the Standard Air Wipe. Force and flow through the Standard Air Wipe may be easily increased by adding shims to open the gap.

Models

BSP Threads Available - Contact Us

Standard Air Wipe Only
Model #
Description
2430
1/2" (13mm) Standard Air Wipe Only
2431
1" (25mm) Standard Air Wipe Only
2432
2" (51mm) Standard Air Wipe Only
2433
3" (76mm) Standard Air Wipe Only
2434
4" (102mm) Standard Air Wipe Only
2435
5" (127mm) Standard Air Wipe Only
2436
6" (152mm) Standard Air Wipe Only
2437 7" (178mm) Standard Air Wipe Only
2439 9" (229mm) Standard Air Wipe Only
2441 11" (279mm) Standard Air Wipe Only

Standard Air Wipe Shim Sets
Model # Description
2350 1/2" (13mm) Standard Air Wipe Shim Set
2351 1" (25mm) Standard Air Wipe Shim Set
2352 2" (51mm) Standard Air Wipe Shim Set
2353 3" (76mm) Standard Air Wipe Shim Set
2354 4" (102mm) Standard Air Wipe Shim Set
2355 5" (127mm) Standard Air Wipe Shim Set
2356 6" (152mm) Standard Air Wipe Shim Set
2357
7" (178mm) Standard Air Wipe Shim Set
2359
9" (229mm) Standard Air Wipe Shim Set
2361 11" (279mm) Standard Air Wipe Shim Set
Shim Sets include (1) each of a .001" (.03mm), .003" (.08mm), .004" (.10mm) thick plastic shim

Accessories
Model #
Description
9001 Automatic Drain Filter Separator, 3/8 NPT, 65 SCFM (1841 SLPM)
9032 Automatic Drain Filter Separator, 1/2 NPT, 90 SCFM (2548 SLPM)
9002 Automatic Drain Filter Separator, 3/4 NPT, 220 SCFM (6230 SLPM)
9005 Oil Removal Filter, 3/8 NPT, 15-37 SCFM (425-1048 SLPM)
9006 Oil Removal Filter, 3/4 NPT, 50-150 SCFM (1415-4248 SLPM)
9008 Pressure Regulator with Gauge, 1/4 NPT, 50 SCFM (1416 SLPM)
9033 Pressure Regulator with Gauge, 1/2 NPT, 100 SCFM (2832 SLPM)
9009 Pressure Regulator with Gauge, 3/4 NPT, 220 SCFM (6230 SLPM)
9020 Solenoid Valve, 120V, 50/60Hz, 1/4NPT, 40 SCFM (1133 SLPM)
9021 Solenoid Valve Only, 200-240V, 50/60Hz, 1/4 NPT, 40 SCFM (1133 SLPM)
9034
Solenoid Valve, 120V, 50/60Hz, 1/2 NPT, 100 SCFM (2832 SLPM)
9035
Medium Solenoid Valve, 240V, 50/60Hz, 1/2 NPT, 100 SCFM (2832 SLPM)
9036
Solenoid Valve, 120V, 50/60Hz, 3/4 NPT, 200 SCFM (5664 SLPM)
9037
Large Solenoid Valve, 240V, 50/60Hz, 3/4 NPT, 200 SCFM (5664 SLPM)