No Drip Internal Mix Atomizing Spray Nozzles

For pressure fed applications that don't require independent air and liquid control.

Internal mix nozzles mix the liquid and water inside the air cap and produce the finest atomization. Internal mix nozzles can be used on liquids with a viscosity up to 300 cP. Both air and liquid sides are pressure fed. No drip atomizing spray nozzles work in the same way our standard atomizing nozzles do, but have the added benefit of positively stopping liquid flow when compressed air is shut off.

Multiple Patterns Available

Internal mix nozzles are available in three patterns: narrow angle round pattern, wide angle round pattern and flat fan pattern.
Narrow Angle Round Pattern - excellent for spraying a concentrated mist of liquid. They can apply a heavy coat up close or send a very fine mist over 30 feet away! Four models available. >>More

Wide Angle Round Pattern
- great for covering a broad area. They can be adjusted for a light mist or a heavy soaking spray. Four models available. >>More

Flat Fan Pattern - good for vertical or horizontal assembly lines. Their broad thin pattern makes efficient use of your expensive liquids. Five models available. >>More

Deflected Flat Fan Pattern - good for applications where space is at a premium. The flat fan pattern sprays at a right angle to the nozzle's orientation. One model available. >>More

360° Hollow Circular Pattern - good for applications where the spray pattern must be oriented away from the nozzle in all directions. 360° nozzles are ideal where a smooth, even coating is needed on the ID of pipe or similar ductwork. One model available. >>More
© Vivek Engineers. All Rights Reserved.