Compressed Air Fittings

Installed between two lengths of pipe to produce a 45° or 90° change of direction.

T-shaped fittings to connect three lengths of pipe in the same plane with one length at right angles to the other two.

Bulkheads pass pipe connections through a wall or other barrier.

These fittings reduce pipe size from a larger to a smaller bore.

These female thread couplers allow two male threaded pipes to be joined together.

A fitting used to connect four lengths of pipe in the same plane with all lengths at right angles to each other.

These short pieces of pipe with male threads at each end are used to connect two other fittings.

These short pieces of pipe with male threads at each end are used to connect two other fittings, with an added hex used to aid with installation.