What Is the Standard
Ion Air Knife?

A sheet of ionized air is an effective way to eliminate static and clean parts or materials!

EXAIR's Standard Ion Air Knife is an effective way to eliminate static. Like its "super" counterpart, the Standard Ion Air Knife removes static electricity from plastics, webs, sheet stock and other surfaces where tearing, jamming or hazardous shocks are a problem.
Image
iak-blue-bucket Gen4® Standard Ion Air Knife
The Model 7218 18" (457mm) Standard Ion Air Knife System shows parts with static 
eliminating ions to prevent personnel shocks.
This ionizer uses our original Standard Air Knife to carry ions from an ionizing bar to the charged surface - up to 20 feet (6.1m) away. Though not as efficient as our Super Ion Air Knife (40:1 air amplification), the Standard Ion Air Knife (30:1 air amplification) still provides fast static decay and strong blowoff force for cleaning. Force can be adjusted from a "blast" to a "breeze". The Standard Ion Air Knife is electrically powered, is shockless and has no moving parts.
iak_frame Gen4® Standard Ion Air Knife
A Model 7212 12" (305mm) Standard Ion Air Knife System
cleans metal frames priorto powder coating.

Why The Standard Ion Air Knife?

When air consumption and noise level are not critical to the application, the lower cost makes the Standard Ion Air Knife a good choice. (To compare the Super Ion Air Knife and Standard Ion Air Knife, see the performance table on the Super Ion Air Knife page and the performance table for the Standard Ion Air Knife, below.) Compressed air inlets are provided on each end of the Standard Ion Air Knife. For long spans, multiple Standard Ion Air Knives can be mounted end-to-end.

This produces an air gap at the connection end of about 2" (51mm). (If no air gap is desired, use the Super Ion Air Knife.) Special length Ionizing Bars up to 120" (3.05m) are available for multiple air knife applications.
iakharddisk Gen4® Standard Ion Air Knife
A Model 7103 3" (76mm) Standard Ion Air Kniferemoves 
dust from computer hard disks prior to assembly.

Applications

Advantages

  • Web cleaning
  • Molding machinery
  • Sheeters and trimmers
  • Cleaning parts
  • Pre-paint dust removal
  • Shrink wrappers
  • Package cleaning
  • Bag opening/fill operations
  • Printing equipment
  • Reduced air consumption
  • 30:1 air amplification
  • Low noise level
  • Shockless, non-radioactive
  • Effective up to 20 feet (6.1m)
  • Compact, rugged, easy to install
  • Unlimited system lengths
  • Low maintenance
  • Variable force and flow

Dimensions

Special Lengths Available - Contact Us

stdiak-dim Standard Ion Air Knife

Universal Air Knife Mounting System

The Model 9060 Universal Air Knife Mounting System is used to provide secure, precise positioning for any of the EXAIR Air Knives. It can be mounted on either the top or bottom of most Air Knives (Super Air Knife, Standard Air Knife and Full-Flow Air Knife). The Universal Air Knife Mounting System has a durable, stainless steel construction that is suitable for a variety of industrial applications. Visit the Super Air Knife Accessories Page for more information about the Universal Air Knife Mounting System.

Performance

Pressure Supply Air Consumption* Sound Level Dissipates 5kV*
PSIG BAR SCFM SLPM dBA Seconds
5 0.3 6 170 66 0.55
10 0.7 8 227 68 0.40
20 1.4 16 453 69 0.25
40 2.8 24 679 78 0.20
60 4.1 32 906 84 0.18
80 5.5 41 1160 87 0.18
100 6.9 49 1387 90 0.18
* per foot (305mm) of length
** 6" (152mm) from target
Image

Electronic Flow Control (EFC)

EXAIR's EFC is an electronic flow control that dramatically reduces compressed air costs by turning off the compressed air when no part is present. This minimizes compressed air use for blow off, drying, cooling, conveying and static elimination operations. The EFC combines a photoelectric sensor with a timing control that limits compressed air use by turning it off when no part is present. Visit the EFC page for more information.
Image

Models

BSP Threads Available - Contact Us

Standard Ion Air Knife
Model #
Description
7103
3" (76mm) Standard Ion Air Knife
7106
6" (152mm) Standard Ion Air Knife
7112
12" (305mm) Standard Ion Air Knife
7118
18" (457mm) Standard Ion Air Knife
7124
24" (610mm) Standard Ion Air Knife
7130
30" (762mm) Standard Ion Air Knife
7136
36" (914mm) Standard Ion Air Knife
7142
42" (1067mm) Standard Ion Air Knife
7148
48" (1219mm) Standard Ion Air Knife
Standard Ion Air Knife consists of the Standard Air Knife and Ionizing Bar assembly

Standard lengths up to 54" (1372mm) are available from stock and special lengths 
up to 119" (3.02m) are available by special order.

UL ListedCE LogoEXAIR Model 7901 or 7907 Power Supply (5 kV) is required for operation.

For use with 5 kVrms, 5 milliamperes (max.) power supply, Model 7901 (115V) or 7907 (230V). Power Supplies are UL Listed to U.S. and Canadian safety standards. (Also available with 4 Outlets - Model 7940 or Model 7941.)

Ionizing bars are UL Component Recognized to U.S. and Canadian Standards.Canadian/US UL Recognized

Accessories and Components
Model #
Description
9060
Universal Air Knife Mounting System
7003
3" (76mm) Ionizing Bar Only (Does not include Standard Air Knife)
7006
6" (152mm) Ionizing Bar Only (Does not include Standard Air Knife)
7012
12" (305mm) Ionizing Bar Only (Does not include Standard Air Knife)
7018
18" (457mm) Ionizing Bar Only (Does not include Standard Air Knife)
7024
24" (610mm) Ionizing Bar Only (Does not include Standard Air Knife)
7030
30" (762mm) Ionizing Bar Only (Does not include Standard Air Knife)
7036
36" (914mm) Ionizing Bar Only (Does not include Standard Air Knife)
7042
42" (1067mm) Ionizing Bar Only (Does not include Standard Air Knife)
7048
48" (1219mm) Ionizing Bar Only (Does not include Standard Air Knife)
7901
Power Supply Only (115V, 50/60 Hz), 2 Outlets
7907
Power Supply Only (230V, 50/60 Hz), 2 Outlets
7940
Power Supply Only (115V, 50/60 Hz), 4 Outlets
7941
Power Supply Only (230V, 50/60 Hz), 4 Outlets
7902
Extension Cable, 5' (1.52m) length
7905
Static Meter
9001
Automatic Drain Filter Separator, 3/8 NPT, 65 SCFM (1841 SLPM)
9032
Automatic Drain Filter Separator, 1/2 NPT, 90 SCFM
9002
Automatic Drain Filter Separator, 3/4 NPT, 220 SCFM (6230 SLPM)
9005
Oil Removal Filter, 3/8 NPT, 15-37 SCFM (425-1048 SLPM)
9006
Oil Removal Filter, 3/4 NPT, 50-150 SCFM (1415-4248 SLPM)
9008
Pressure Regulator with Gauge, 1/4 NPT, 50 SCFM (1416 SLPM)
9033
Pressure Regulator with Gauge, 1/2 NPT, 100 SCFM
9009
Pressure Regulator with Gauge, 3/4 NPT, 220 SCFM (6230 SLPM)
9020
Solenoid Valve, 120V, 50/60Hz, 1/4 NPT, 40 SCFM (1133 SLPM)
9021
Solenoid Valve Only, 200-240V, 50/60Hz, 1/4 NPT, 40 SCFM (1133 SLPM)
9034
Medium Solenoid Valve, 120V, 50/60Hz, 1/2 NPT, 100 SCFM (2832 SLPM)
9035
Medium Solenoid Valve, 240V, 50/60Hz, 1/2 NPT, 100 SCFM (2832 SLPM)
9036
Large Solenoid Valve, 120V, 50/60Hz, 3/4 NPT, 200 SCFM (5664 SLPM)
9037
Large Solenoid Valve, 240V, 50/60Hz, 3/4 NPT, 200 SCFM (5664 SLPM)
© Vivek Engineers. All Rights Reserved.

Menu